Preview
LM-3000
The LM-lug is used to clamp the gas spring vertically upright to the tool. The gas spring can be clamped down using 2, 3 or 4 LM-lugs.
If only 2 lugs are used, then locking plate L must also be used to fix the gas spring.
Note: When using locking plate L together with LM-lugs, the spring cannot be hosed together as the L-plate will cover the gas charge port of the gas spring.
Important! The LM-lugs are only to be used to mount the spring vertically upright.
If only 2 lugs are used, then locking plate L must also be used to fix the gas spring.
Note: When using locking plate L together with LM-lugs, the spring cannot be hosed together as the L-plate will cover the gas charge port of the gas spring.
Important! The LM-lugs are only to be used to mount the spring vertically upright.
The LM-lug is used to clamp the gas spring vertically upright to the tool. The gas spring can be clamped down using 2, 3 or 4 LM-lugs.
If only 2 lugs are used, then locking plate L must also be used to fix the gas spring.
Note: When using locking plate L together with LM-lugs, the spring cannot be hosed together as the L-plate will cover the gas charge port of the gas spring.
Important! The LM-lugs are only to be used to mount the spring vertically upright.
If only 2 lugs are used, then locking plate L must also be used to fix the gas spring.
Note: When using locking plate L together with LM-lugs, the spring cannot be hosed together as the L-plate will cover the gas charge port of the gas spring.
Important! The LM-lugs are only to be used to mount the spring vertically upright.
Diagram / specifications section
Preview
Preview
| C | C (in) | 1.575 |
| D | D (in) | 0.689 |
| E | E (in) | 0.551 |
| F | F (in) | 5.118 |
